Cathode ray tube

Search Results for: Cathode ray tube

the valve flow direction. . confirm that cock valve ( ) handle is turn to auto. . open fully the upstream isolating valve and slowly open the downstream isolating valve, to fill-up, carefully, the consumers' line downstream from the valve. . vent air from the valve's control loop by loosening cover tube

fitting at the highest point, allowing all air to bleed. then retighten the tube fitting. . the ir- -xz is factory set according to the design. the set pressure is marked on each of the pilot's label. . pressure sustaining pilot [psp]: the pilot with port & connected to the valve upstream. . pressure...

https://www.bermad.com/wp-content/uploads/2016/05/IR-123-XZ.pdf

. note: when upstream pressure is below the - -x setting, the valve is closed. . open fully the upstream isolating valve and slowly open the downstream isolating valve, to fill-up, carefully, the consumers' line downstream from the valve. . vent air from the valve's control loop by loosening cover tube

fitting at the highest point, allowing all air to bleed. then retighten the tube fitting. . the model ir- - -x is factory set according to design definitions. the set pressure is marked on the pilot label. . if the set pressure is either different from the design or the requirements have been changed...

https://www.bermad.com/wp-content/uploads/2016/05/IR-130-54-X.pdf

valve to start regulation by positioning the cock valve ( ) handle on port auto. . open fully the upstream isolating valve and slowly open the downstream isolating valve, to fill-up, carefully, the consumers' line downstream from the valve. . vent air from the valve's control loop by loosening cover tube

fitting at the highest point, allowing all air to bleed. then retighten the tube fitting. . the ir- -dzb is factory set according to the design. the set pressure is marked on each of the pilot's label. . the set flow on the flow control pilot [fcp] (pc-sd) label. . the set downstream pressure on the...

https://www.bermad.com/wp-content/uploads/2016/05/IR-172-bDZ.pdf

regulation by using the hydraulic relay manual override, or by hydraulic command. . open fully the upstream isolating valve and slowly open the downstream isolating valve, to fill-up, carefully, the consumers' line downstream from the valve. . vent air from the valve's control loop by loosening cover tube

fitting at the highest point, allowing all air to bleed. then retighten the tube fitting. . the ir- - -kx is factory set according to the design. the set pressure is marked on the pilot label, if the set pressure is either different from the design or the requirements have been changed, change settings...

https://www.bermad.com/wp-content/uploads/2016/05/IR-420-54-KX.pdf

regulation by using the hydraulic relay manual override, or by hydraulic command. . open fully the upstream isolating valve and slowly open the downstream isolating valve, to fill-up, carefully, the consumers' line downstream from the valve. . vent air from the valve's control loop by loosening cover tube

fitting at the highest point, allowing all air to bleed. then retighten the tube fitting. . the ir- - -bk is factory set according to the design. the set pressure is marked on the pilot label, if the set pressure is either different from the design or the requirements have been changed, change settings...

https://www.bermad.com/wp-content/uploads/2016/05/IR-420-54-bK.pdf

valve to open by using the solenoid manual override or by: operating the solenoid. . open fully the upstream isolating valve and slowly open the downstream isolating valve, to fill-up, carefully, the consumers' line downstream from the valve. . vent air from the valve's control loop by loosening cover tube

fitting at the highest point, allowing all air to bleed. then retighten the tube fitting. . the ir- - -kx is factory set according to the design. the set pressure is marked on the pilot label, if the set pressure is either different from the design or the requirements have been changed, change settings...

https://www.bermad.com/wp-content/uploads/2016/05/IR-420-55-KX.pdf

valve to open by using the solenoid manual override or by: operating the solenoid. . open fully the upstream isolating valve and slowly open the downstream isolating valve, to fill-up, carefully, the consumers' line downstream from the valve. . vent air from the valve's control loop by loosening cover tube

fitting at the highest point, allowing all air to bleed. then retighten the tube fitting. . the ir- - -r is factory set according to the design. the set pressure is marked on the pilot label, if the set pressure is either different from the design or the requirements have been changed, change settings...

https://www.bermad.com/wp-content/uploads/2016/05/IR-420-55-R.pdf

valve to open by using the solenoid manual override or by: operating the solenoid. . open fully the upstream isolating valve and slowly open the downstream isolating valve, to fill-up, carefully, the consumers' line downstream from the valve. . vent air from the valve's control loop by loosening cover tube

fitting at the highest point, allowing all air to bleed. then retighten the tube fitting. . the ir- - -kb is factory set according to the design. the set pressure is marked on the pilot label, if the set pressure is either different from the design or the requirements have been changed, change settings...

https://www.bermad.com/wp-content/uploads/2016/05/IR-420-55-bK.pdf

direction. . confirm that cock valve are open (handle parallel to cock-valve body). . open fully the upstream isolating valve and slowly open the downstream isolating valve, to fill-up, carefully, the consumers' line downstream from the valve. . vent air from the valve's control loop by loosening cover tube

fitting at the highest point, allowing all air to bleed. then retighten the tube fitting. . the ir- -r is factory set according to the design. the set pressure is marked on each of the pilot's label. . pressure sustaining pilot [psp]: the pilot with port no' connected to the valve upstream. . pressure...

https://www.bermad.com/wp-content/uploads/2016/05/IR-423.pdf

fully the upstream isolating valve and slowly open the downstream isolating valve, to fill-up, carefully, the consumers' line downstream from the valve. note: when upstream pressure is below the ir- - -kxz r setting, the valve is closed. . vent air from the valve's control loop by loosening cover tube

fitting at the highest point, allowing all air to bleed. then retighten the tube fitting. . the model ir- - -kxz is factory set according to design definitions. the set pressure is marked on the pilot label. . if the set pressure is either different from the design or the requirements have been changed...

https://www.bermad.com/wp-content/uploads/2016/05/IR-430-50-KXZ.pdf