Cathode ray tube

Cathode ray tube

Search Results for: Cathode ray tube
open fully the upstream isolating valve and slowly open the downstream isolating valve, to fill-up, carefully, the consumers' line downstream from the valve. note: when upstream pressure is below the ir - -xz setting, the valve is closed. . vent air from the valve's control loop by loosening cover tube
fitting at the highest point, allowing all air to bleed. then retighten the tube fitting. . the model ir- -xz is factory set according to design definitions. the set pressure is marked on the pilot label. . if the set pressure is either different from the design or the requirements have been changed...
https://www.bermad.com/wp-content/uploads/2016/05/IR-130-XZ.pdf
valve flow direction. . confirm that the cock valve ( ) handle is turn to auto. . open fully the upstream isolating valve and slowly open the downstream isolating valve, to fill-up, carefully, the consumers' line downstream from the valve. . vent air from the valve's control loop by loosening cover tube
fitting at the highest point, allowing all air to bleed. then retighten the tube fitting. . the model ir- - -bd is factory set according to the design maximum flow request. the set flow is marked on the pilot label. allow the flow inspected in the system to stabilize, meeting the marked set flow. ....
https://www.bermad.com/wp-content/uploads/2016/05/IR-170-54-bD.pdf
valve flow direction. . confirm that the cock valve ( ) handle is turn to auto. . open fully the upstream isolating valve and slowly open the downstream isolating valve, to fill-up, carefully, the consumers' line downstream from the valve. . vent air from the valve's control loop by loosening cover tube
fitting at the highest point, allowing all air to bleed. then retighten the tube fitting. . the model ir- -bdz is factory set according to the design maximum flow request. the set flow is marked on the pilot label. allow the flow inspected in the system to stabilize, meeting the marked set flow. iom...
https://www.bermad.com/wp-content/uploads/2016/05/IR-170-bDZ.pdf
valve to start regulation by positioning the cock valve ( ) handle on port auto. . open fully the upstream isolating valve and slowly open the downstream isolating valve, to fill-up, carefully, the consumers' line downstream from the valve. . vent air from the valve's control loop by loosening cover tube
fitting at the highest point, allowing all air to bleed. then retighten the tube fitting. . the ir- - -kxz is factory set according to the design. the set pressure is marked on the pilot label, if the set pressure is either different from the design or the requirements have been changed, change settings...
https://www.bermad.com/wp-content/uploads/2016/05/IR-420-50-KXZ-iom-1.5-4inch.pdf
direction. . confirm that cock valve ( ) is open (handle is parallel to valve body). . open fully the upstream isolating valve and slowly open the downstream isolating valve, to fill-up, carefully, the consumers' line downstream from the valve. . vent air from the valve's control loop by loosening cover tube
fitting at the highest point, allowing all air to bleed. then retighten the tube fitting. . the ir- - -r is factory set according to the design. the set pressure is marked on the pilot label, if the set pressure is either different from the design or the requirements have been changed, change settings...
https://www.bermad.com/wp-content/uploads/2016/05/IR-420-50-R-iom-1.5-4inch.pdf
valve to start regulation by positioning the cock valve ( ) handle on port auto. . open fully the upstream isolating valve and slowly open the downstream isolating valve, to fill-up, carefully, the consumers' line downstream from the valve. . vent air from the valve's control loop by loosening cover tube
fitting at the highest point, allowing all air to bleed. then retighten the tube fitting. . the ir- - -rxz is factory set according to the design. the set pressure is marked on the pilot label, if the set pressure is either different from the design or the requirements have been changed, change settings...
https://www.bermad.com/wp-content/uploads/2016/05/IR-420-50-RXZ-iom-1.5-4inch.pdf
valve to start regulation by positioning the cock valve ( ) handle on port auto. . open fully the upstream isolating valve and slowly open the downstream isolating valve, to fill-up, carefully, the consumers' line downstream from the valve. . vent air from the valve's control loop by loosening cover tube
fitting at the highest point, allowing all air to bleed. then retighten the tube fitting. . the ir- - -brz is factory set according to the design. the set pressure is marked on the pilot label, if the set pressure is either different from the design or the requirements have been changed, change settings...
https://www.bermad.com/wp-content/uploads/2016/05/IR-420-50-bRZ.pdf
opening valve, confirm hydraulic pressure command in the hydraulic relay ( -m). . open fully the upstream isolating valve and slowly open the downstream isolating valve, to fill-up, carefully, the consumers' line downstream from the valve. . vent air from the valve's control loop by loosening cover tube
fitting at the highest point, allowing all air to bleed. then retighten the tube fitting. . the ir- -m - -r is factory set according to the design. the set pressure is marked on the pilot label, if the set pressure is either different from the design or the requirements have been changed, change settings...
https://www.bermad.com/wp-content/uploads/2016/05/IR-420-54-R.pdf
open fully the upstream isolating valve and slowly open the downstream isolating valve, to fill-up, carefully, the consumers' line downstream from the valve. note: when upstream pressure is below the ir- -kxz setting, the valve is closed. . vent air from the valve's control loop by loosening cover tube
fitting at the highest point, allowing all air to bleed. then retighten the tube fitting. . the model ir- -kxz is factory set according to design definitions. the set pressure is marked on the pilot label. . if the set pressure is either different from the design or the requirements have been changed...
https://www.bermad.com/wp-content/uploads/2016/05/IR-430-KXZ.pdf
. . open fully the upstream isolating valve and slowly open the downstream isolating valve, to fill-up, carefully, the consumers' line downstream from the valve. note: when upstream pressure is below the -rxz setting, the valve is closed. . vent air from the valve's control loop by loosening cover tube
fitting at the highest point, allowing all air to bleed. then retighten the tube fitting. . the model -rxz is factory set according to design definitions. the set pressure is marked on the pilot label. . if the set pressure is either different from the design or the requirements have been changed follow...
https://www.bermad.com/wp-content/uploads/2016/05/IR-430-RXZ.pdf